CROSS‐CHECK

  • BlueGreenGray
  • BlueGreenGray
  • BlueGreenGray
  • BlueGreenGray
  • BlueGreenGray
  • Gloss Black
商品名
CROSS‐CHECK
価格
税込¥86,900 (フレーム/フォーク)
サイズ
42, 46, 50, 52, 54, 56, 58, 60, 62, 64cm
カラー
Gloss Black
BlueGreenGray
カテゴリー
フレーム
すべてを可能にするスチール製コミューターバイク

1台ですべてをまかなえるバイクはありませんが、Cross-Checkはそれに近いバイクです。このバイクは、コミューターであり、ユーティリティバイクでもあります。グラベルバイクが登場するずっと前から「グラベルクラッシャー」だったのです。シクロクロスのレースで活躍した人もいます。しかし、私たちは必ずしもそのような行動を容認しているわけではありません。

クロスチェックは、私たちが提供した最初のコンプリートバイクです。それ以来、人々は自分のライディングスタイルや好みに合わせて、何百通りもの改造を施してきました。サーリーの社員がほぼ全員、このバイクを所有しているのには理由があります。

・シングルスピードとの互換性とホイールベース調整のためのセミホリゾンタルドロップアウト。
・130mm、135mmハブの装着を可能にするGnot-Riteドロップアウトスペーシング。
・フロントとリアにラックとフェンダーの取り付けが可能。
・700cx42mmのタイヤが装着可能で、フェンダーの有無に関係なく使用可能
SPEC
Tubing Surly 4130 CroMoly steel. Main triangle double-butted. TIG-welded. ED Coated
   
Rear Dropouts Semi-horizontal dropouts give you singlespeed compatibility and wheelbase adjustability. Adjuster screws are included to keep your wheel in the right place for optimal shifting if you go with derailleurs. Our Gnot-rite spacing (132.5mm) allows you to run 130mm road hubs and 135mm MTB hubs
Brake Compatibility Cantilever brake studs front and rear
   
Braze-ons/extras Bosses front and rear to take cantilever or linear-pull brakes, eyelets at the dropouts, rear rack bosses, dual water bottle mounts, downtube shifter bosses, fully threaded through-blade fork eyelets for a front rack
Seatpost diameter 27.2mm
Seatpost clamp diameter 30.0mm Surly stainless, included
Headset/Steerer Tube 1-1/8˝ threadless
Front Derailleur Clamp Diameter 28.6mm
   
Bottom bracket shell 68mm wide, standard English threaded 1.37˝ x 24t
   
Chainring Clearance Manipulated stays so you can fit the size rings you want. Go nuts
   
Tire Clearance Fatties Fit Fine (FFF) stays and our beautiful slope-crowned custom fork provide room for tires up to 700c x 42mm, or about 700c x 40mm with fenders. Largest possible tire size depends on tire, rims, axle location in the dropouts, and other factors, but still, you can run pretty damn big tires
   
Fork 4130 CroMoly, lugged and brazed. Sloping crown with threaded eylets, tapered and butted curved blades with mid-blade rack eyelets, dual dropout eyelets
  42cm 46cm 50cm 52cm 54cm 56cm 58cm 60cm 62cm 64cm
Seat Tube Length 420 460 500 520 540 560 580 600 620 665
(Center-Top)
Top Tube Length 505 515 535.1 545.1 559.9 569.9 579.8 599.8 609.9 630
(Center-Center)
Effective Top Tube Length 522 528.8 541.8 547.1 560 570 580 600 610 630
(Center-Center)
Head Tube Angle 72 72 72 72 72 72 72 72 72 72
Seat Tube Angle 75 74.5 74 73.5 73 72.5 72.5 72 72 72
BB Drop 66 66 66 66 66 66 66 66 66 66
Chainstay Length 420 420 425 425 425 425 425 425 425 425
Wheelbase 989.8 991.9 1005.2 1005.9 1014.3 1019.7 1029.9 1044.7 1054.7 1074.6
Standover Height 731.9 750.7 768.4 778.4 793 810.7 829.9 847.4 866.2 885.8
Head Tube Length 91 91 91 91 102 121 141 160 180 200
Fork Length 400 400 400 400 400 400 400 400 400 400
Fork Offset 44 44 44 44 44 44 44 44 44 44
Stack 528 528 528 528 538.4 556.5 575.7 593.6 612.7 630.9
Reach 378.7 380.8 389.1 389.7 394.8 394.3 398.3 407.3 411 424.5
* Standover is measured from the top of the TT, at the center, with a tire measuring approximately Ø685mm    

FOLLOW US新商品やイベントなど最新情報をチェック!