税込¥341,000 (フレームセット)



FrameCutthroat Carbon V2
ForkCutthroat Carbon Deluxe V2
ColorRaw Carbon
Rear Shockn/a


HeadsetCane Creek 40


Front WheelDeadbolt Ultralight Thru-Axle included
Rear WheelDeadbolt Ultralight Thru-Axle included


Frameset WeightTBD

Design Wheel x Tire Size

29 x 2.25″ (29 x 2.4″ Max) (Some front derailleurs may reduce tire clearance. Check manufacturer’s specifications to confirm clearance before installing.)
Susp Fork Length (Travel)506 mm (100 mm Travel)
Rigid Fork Length483 mm
Fork Offset51 mm
Front Spacing110 x 15 mm Thru-axle
Front Brake (Rotor)Flat mount (160–180 mm), flat mount frame standard (35 mm thickness), 42 mm bolt length
Front Rack MountsYes, lowrider compatible. Salsa Down Under rack recommended.
Fork Accessory MountsYes, one set of Three-Pack mounts on each fork leg
Headset, UpperIS52
Seatpost27.2 mm
Seat Collar32.0 mm
Dropper Compatible (Routing)Yes, internal
Front Derailleur TypeRoad, braze-on, 2x, bottom-pull
Bottom BracketPress Fit BB92, 41 x 92 mm
Crankset (Max & Min Ring)1x MTN Boost: 40t Max; 2x RD Boost outer ring: 46–50t, inner ring: 30–36t *Oval chainrings subtract 2t from max*
Rear Brake (Rotor)Flat mount (140–160 mm), flat mount frame standard (25mm Thickness), 32 mm bolt length
Rear Spacing148 x 12 mm Thru-axle
Rear Axle SizeØ12 x 174, TP=1.5, TL=20
Derailleur HangerQBP #FS2322
Rear Rack MountsYes, Salsa Rack Lock seatpost collar required. Salsa Wanderlust Rack recommended. Salsa Bent Rack Struts (part #RK8030) required for installation on 58 cm and 60 cm frames. Not compatible with Salsa Wanderlust HD Rack
Rear Fender Mountsn/a
Water Bottle MountsFrames up to 54cm: 2 in main triangle. Frames 56cm and larger: 3 in main triangle.
Under Downtube MountYes, two pair.
Top Tube MountsYes, compatible with Salsa Top Tube bag.
Internal Dropper Post Routing1x mechanical drivetrain: Route the dropper post cable through the drive side of the down tube. Di2 drivetrains: Move the battery to the down tube, routing it through the head tube, then route the dropper post cable through the drive side of the down tube.
External Dropper Post Routing1x and 2x mechanical and Di2 drivetrains:Route the dropper post cable through the dynamo rear light holes on the non-drive side of the top
A. Effective Top Tube520540560580600 
B. Stand Over700.44741.72810.51851.75874.22 
C. Reach357.77372.91385.28395.13406.36 
D. Stack584.98592.45619.53644.73664.34 
E. Total Seat Tube Length355.6419.1508558.8584.2 
F. Headtube Length9098127154175 
G. Headtube Angle6969696969 
H. Seat Tube Angle74.574.2574.257473.75 
I. BB Drop7070707070 
K. Chainstay Length445445445445445 
L. Fork Length Axle to Crown483483483483483 
M. Fork Offset5151515151 
N. Wheelbase1049.541067.551090.311109.831128.6 
Crank Arm Length170170175175175 
Handlebar Width40cm42cm44cm44cm46cm 
Recommended Rider Height154cm–168cm168cm–175cm173cm–185cm183cm–193cm190cm–UP 
Stem Length6070808090 

Measurements based on:

an 483mm AC x 51mm offset fork which is equivalent to an average 100mm 29″” suspension fork at 25% sag
a 29″ x 2.2″ tire measuring 740mm in diameter    
Standover for all sizes is measured vertically to top of toptube from a position 50mm forward of BB center.

FOLLOW US新商品やイベントなど最新情報をチェック!