SALSA CYCLES

18 TIMBERJACK FRAME

商品名
18 TIMBERJACK FRAME
価格
税込￥59,400 (フレーム)
サイズ
XS, S, M, L
カラー
Charcoal
カテゴリー
フレーム
TIMBERJACK
SINGLETRACK / BIKEPACKING / OFF-ROAD EXPLORATION

シングルトラックからバイクパッキングまで、幅広い山遊びに対応するアルミハードテイル。クイックなハンドリングとスーパーショートチェーンステイはトレイルを機敏に走り回り、あなたを未到達の地へと誘ってくれるでしょう。

ALTERNATOR DROPOUT採用でリヤセンターを調整できる他、BOOST REDUCTION KITやALTERNATOR PLATEの交換により幅広いカスタムに対応します。

フレームは29erと27.5+のコンパチブル。
バイクパッキング仕様へのカスタムにはANYTHING CAGEに対応したFIRESTARTER FORKへの交換がオススメです。

※完成車の販売もございます。
SPEC
Frameset
FrameTimberjack Aluminum
ForkRockShox Recon RL Solo Air 120mm, BOOST
ColorCharcoal
Rear ShockN/A
Design Wheel/Tire Size27.5 x 3.0″ max. (at 427mm rear center)
Alternative Wheel/Tire Size29 x 2.5″ max. (at 420mm rear center)
Suspension Fork Length (Travel)511–541mm (100–130mm)
Rigid Fork Length483–502mm
Fork Offset45–51mm
Headset-UpperZS44
Headset-LowerZS56
Seatpost30.9mm
Seat Collar35.0mm
Dropper Compatible (Routing)Yes
Front Derailleur Mount148mm rear spaced: high direct mount (29mm offset) via 34.9mm clamp Problem Solvers Bracket (FS1328) 
142mm rear spaced: high direct mount (26.5mm offset) via 34.9mm clamp Problem Solvers bracket (FS1323)
　　
Bottom Bracket73mm BSA, threaded
　　
Crankset (Max Ring)1x crankset: 32t max. Boost or 30t max. 
Non-Boost, 2x crankset: 36/24t max. 
Boost and 36/24t Non-Boost
　　
Rear Brake, (Rotor)51mm I.S., (160–180mm)
Rear Spacing148mm; 142/135mm capable w/ Alternator Reduction Plates (FS2360)
Rear Axle Size12 x 180L, TP = 1.75, TL = 20
　　
Derailluer HangerQR = FS1312; TA = FS1373; SS = FS1318; SSTA = FS1375; L Rohloff = FS1371; TA Kit = FS1370
　　
Rack MountsYes w/ Alternator Rack System
Fender MountsNo
Stem Clamp28.6mm
Crown Race40mm
Front Brake (Rotor)N/A
Front SpacingN/A
Geometry with 120mm Suspension Fork
SizeXSSML
Recommended Rider Height157cm–168cm160cm–175cm173cm–183cm180cm–191cm
A. Toptube Effective570mm590mm610mm640mm
B. Seat Tube Length355.6mm381.0mm431.8mm482.6mm
C. Headtube Angle68.0°68.0°68.0°68.0°
D. Seat Tube Angle73.5°73.5°73.5°73.5°
E. BB Drop58mm58mm58mm58mm
F. Chainstay Length420–437mm420–437mm420–437mm420–437mm
G. Headtube Length100mm100mm110mm120mm
H. Fork Length499mm499mm499mm499mm
J. Fork Offset51mm51mm51mm51mm
K. Wheelbase1083–1099mm1103–1119mm1124–1140mm1155–1171mm
M. Stack598mm598mm608mm617mm
N. Reach394mm414mm431mm459mm
P. Standover694mm709mm749mm786mm
　
Geometry with Rigid Fork
SizeXSSML
Recommended Rider Height157–168cm160–175cm173–183cm180–191cm
A. Toptube Effective567mm587mm607mm637mm
B. Seat Tube Length355.6mm381.0mm431.8mm482.6mm
C. Headtube Angle68.8°68.8°68.8°68.8°
D. Seat Tube Angle74.4°74.4°74.4°74.4°
E. BB Drop64mm64mm64mm64mm
F. Chainstay Length420–437mm420–437mm420–437mm420–437mm
G. Headtube Length100mm100mm110mm120mm
H. Fork Length483mm483mm483mm483mm
J. Fork Offset45mm45mm45mm45mm
K. Wheelbase1071mm1091mm1112mm1143mm
M. Stack593mm593mm602mm611mm
N. Reach402mm422mm439mm466mm
P. Standover682mm699mm738mm777mm
Measurements based on:
Build 1: A 499 x 51mm offset fork which is equivalent to an average 120mm fork at 25% sag Build 2: A 483 x 45mm offset fork which is equivalent to an average 100mm fork at 20% sag.
Measurements listed are based on a 29 x 2.4″ tire measuring 740mm in diameter.
Standover (P) for all sizes is measured vertically to top of toptube from a position 50mm forward of BB center.

関連商品

salsa-cyclesフレーム

関連商品

salsa-cycles

FOLLOW US新商品やイベントなど最新情報をチェック！

PAGE TOP